McNab Torque Signal Conditioner (62011)

Marine Systems > Shaft Horsepower / Torque Meters > Torque Signal Conditioner

Printable Version

General Description

The McNab "Torque Signal Conditioner" (Catalogue#: 62011) is a completely solid-state high precision measurement device, which utilizes its advanced circuitry to interpret data from a given FM input signal. The instrument is of rugged construction and offers exceptional operational stability.

Application

The instrument is used where receiving and decoding an FM signal is the primary consideration. In addition, this device will produce an output signal, which is directly proportional to the input signal.

Specifications

Modulation Type: FM/FM (100 kHz deviation typical)
Capture Range: 9.90 MHz to 11.10 MHz
Center Frequency: 10.68 MHz
Modulated Frequency Range: 1.0 kHz to 2.2 kHz
Input Signal Amplitude Range: 0.30 mV to 3.0 V
Frequency Selective Tuning: Screwdriver adjustable between capture range
Zero Control: Screwdriver adjustable, 50% of full scale
Span Control: Screwdriver adjustable, 50% of full scale
Standard Output: 0 to +10V
Optional Outputs: 0 to +- 5V (differential)

0 to +- 5V (isolated)

0 to +- 1mA (single-ended)

4 to 20 mA (isolated)

0 to +- 1V

0 to +- .5mA

Signal To Noise Ratio: Better than 40 dB
Repeatability: 0.1% of full scale
Linearity: 0.1% of full scale
Accuracy: +- 0.5% of full scale
Power Requirements: 109-121 VAC / 60 Hz
Power Dissipation: 10.8 Watts (Maximum)
Power Supply Current: 450 mA (Maximum)
Input Impedance: 100 kohms
Output Impedance: 1 ohm
Temperature Range: 14° F to 149° F (operating)
Interface: 10 Pin terminal block
Elapse Time Indicator: Optional
Construction: Aluminum alloy enclosure
Weight: 12.0 lbs
Dimensions: 8 3/8" x 11 9/16" x 7"
Other: Consult factory for special requirements

Specifications subject to change without notice.

A02-23A

20 North MacQuesten Parkway | Mount Vernon NY | USA 10550

914 699 1616 voice | 914 699 1671 fax | info@themcnab.com

Copyright © 1999 - 2007  McNab, Inc. All Rights Reserved.  Last modified: 04.17.2007

Standard Terms and Conditions

webmaster@themcnab.com

Visa InternationalMcNab now accepts all major credit cards.